AI-generated Rexroth 4WE10 series appearance reference; 2 solenoids; exact spool and configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Valves

Rexroth 4WE10D5X/OFEG24N9K4/M Solenoid Directional Valve

Rexroth 4WE10D5X/OFEG24N9K4/M, material number R901278763, is an NG10 direct-operated 4/2 solenoid directional spool valve. It uses 24 V DC actuation, K4 electrical connections and NBR seals. Original new product; request current pricing.

Catalog type code: 4WE10D5X/OFEG24N9K4/M

Material number / MPN: R901278763
Nominal size: NG10
Main ports / positions: 4 ports / 2 positions
Supply voltage: 24 V DC (G24)

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth 4WE10D5X/OFEG24N9K4/M identifies an NG10, component-series 5X directional valve with spool symbol D. This catalog configuration uses two solenoids with detent and no spring return. Provide the full nameplate and circuit requirements so the supplied unit can be confirmed.

Adding detent operation to the NG10 range

The OF version has two solenoids and a detent, with no spring return. Its two working paths are P to A with B to T, and P to B with A to T. The detent retains the selected working position after de-energization under the intended operating conditions. Check the control sequence and tank-line pressure peaks; this configuration does not provide an automatic spring-return state.

Key configuration details

Four main ports and 2 switching positions; spool symbol D.
2 solenoids; detent; no spring return.
G24: 24 V DC actuation.
K4: individual 3-pole connector interface, 2 + PE; mating connector ordered separately.
Subplate mounting to ISO 4401-05-04-0-05.
NBR seals for the specified catalog configuration.

Configuration code

4WE10 denotes a four-port solenoid-operated directional spool valve, size 10. D identifies the hydraulic symbol and 5X the component-series family. OF specifies a detent without spring return. E after the slash identifies the high-power wet-pin solenoid with detachable coil. G24 is 24 V DC, N9 is the concealed manual override, and K4 is the individual electrical connection. The /M suffix specifies NBR seals; it is separate from the spool symbol.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	4WE10D5X/OFEG24N9K4/M
Material number / MPN	R901278763
Valve type	Direct-operated solenoid directional spool valve
Nominal size	NG10
Component series	5X
Main ports / positions	4 ports / 2 positions
Spool symbol	D
Solenoids	2
Return / holding arrangement	Detent; no spring return
Center / de-energized behavior	No spring-defined de-energized position; the detent retains the selected working position.
Supply voltage	24 V DC (G24)
Electrical connection	K4; 3-pole (2 + PE), EN 175301-803; mating connector separate
Manual override	N9; concealed
Mounting pattern	ISO 4401-05-04-0-05
Seals	NBR (/M)
Maximum P, A and B pressure	350 bar; operating envelope applies
Maximum T-port pressure	210 bar for DC version; manual override limit differs
Series DC flow ceiling	160 L/min; series reference only, not a guaranteed flow rating for this spool

Catalog pressure limits are 350 bar at P, A and B, and 210 bar at T for the DC version. N9 manual override operation is limited to a tank pressure of 50 bar and has no assigned safety function. Select the operating point using the actual flow path, pressure and fluid conditions.

The standard NG10 DC series has a catalog flow ceiling of 160 L/min. This is not a rated flow at every pressure for 4WE10D5X/OFEG24N9K4/M. Verify the exact spool performance curves, return pressure and pressure drop for the required flow. The maximum pressure and series flow ceiling are not a simultaneous operating guarantee.

Selection and installation

Match the full type code, material number, spool function and all additional suffixes.
Check the NG10 manifold pattern, port arrangement and installation dimensions.
Confirm 24 V DC control, 2 solenoids, K4 mating connectors and the required de-energized behavior.
Provide P/A/B and tank pressures, working flow, oil type, temperature and filtration conditions.
Confirm mating connectors, subplate, mounting screws and other accessories separately.
Assess tank-line pressure peaks and the retained spool position; OF has no automatic spring return.

Information for a quotation

Catalog configuration: 4WE10D5X/OFEG24N9K4/M; material number: R901278763
Quantity, destination and required supply condition
Clear valve nameplate, coil markings and hydraulic symbol
Circuit diagram, required de-energized state and operating sequence
Working flow, P/A/B pressure and tank-line backpressure
24 V DC control details, connector and accessory requirements
Hydraulic fluid, operating temperature and requested delivery date

Frequently asked questions

Will the valve spring back when power is removed?

No. OF indicates detent operation without spring return. The selected working position is retained under the intended conditions. Check the control sequence and tank-line pressure peaks; do not use the detent as a safety function.

Are electrical plugs and a subplate included?

K4 specifies the valve electrical interface. Mating connectors are ordered separately; confirm plugs, subplate, mounting screws and other accessories in the quotation.

Can this valve always deliver 160 L/min?

What is needed to confirm price and availability?

Send the full identification, quantity, destination, operating requirements and desired supply condition. Price, availability, delivery and warranty terms will be confirmed in the quotation.

Request a Quote