AI-generated Rexroth PGH series appearance reference for PGH2-2X/006RE07VU2; exact configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Pumps

Rexroth PGH2-2X/006RE07VU2 Internal Gear Pump

Rexroth PGH2-2X/006RE07VU2 internal gear pump, material number R900951301. Fixed displacement 6.50 cm³/rev with clockwise rotation and a keyed shaft. Original new product; request current pricing.

Catalog type code: PGH2-2X/006RE07VU2

Material number / MPN: R900951301
Geometric displacement: 6.50 cm³/rev
Maximum operating pressure: 315 bar

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth PGH2-2X/006RE07VU2 is a frame-size 2, NG 6 internal gear pump with a fixed geometric displacement of 6.50 cm³/rev. This page identifies the R900951301 catalog configuration for quotation. Match the complete nameplate and installation details when requesting a replacement.

Separating nominal size from displacement

The 006 size uses 6.50 cm³/rev geometric displacement. Use that value when defining the intended flow duty, and include the drive speed and oil condition. Compare the complete RE07VU2 configuration with the existing pump rather than relying on a shortened PGH2/006 reference.

Key configuration details

6.50 cm³/rev fixed geometric displacement.
Clockwise rotation with RE07VU2 configuration.
Catalog material number R900951301 for identification.

2X denotes the component series family. R = clockwise viewed at the shaft end; E = cylindrical keyed shaft; 07 = suction and pressure ports to ISO 6162-1; V = FKM shaft seal and seals; U2 = two-hole mounting flange to ISO 3019-1.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	PGH2-2X/006RE07VU2
Material number / MPN	R900951301
Pump type	Internal gear pump; fixed displacement
Frame size	2
Component series	2X
Nominal size	NG 6
Geometric displacement	6.50 cm³/rev
Maximum operating pressure	315 bar
Peak pressure	350 bar; transient limit only
Catalog speed range	600–3000 rpm; operating conditions apply
Rotation	Clockwise, viewed at the shaft end
Shaft end	E — cylindrical keyed shaft
Pressure port	ISO 6162-1
Suction port	ISO 6162-1
Seals	V — FKM shaft seal and seals
Mounting	U2 — two-hole flange to ISO 3019-1

Maximum operating pressure: 315 bar. Peak pressure: 350 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 600–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

Match the complete nameplate, material number and any additional suffixes.
Confirm clockwise rotation, shaft dimensions, coupling and mounting flange dimensions.
Verify the pressure and suction port sizes, flange pattern and installation orientation.
Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.

Request a quotation

Please include:

Required catalog configuration: PGH2-2X/006RE07VU2; material number: R900951301
Quantity and destination country
Existing pump nameplate and photographs of the shaft, flange and ports
Working pressure, pressure cycle, drive speed and required flow
Hydraulic fluid, operating temperature and installation details
Required supply condition and requested delivery date

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH2-2X/006RE07VU2

Frequently asked questions

Is PGH2-2X/006RE07VU2 a variable-displacement pump?

It has fixed displacement. Flow changes with shaft speed and operating losses; the pump code does not specify an adjustable displacement controller.

Can I order using the reference PGH2-22/006RE07VU2?

Include that reference and a nameplate photograph. This page uses the 2X series-family designation and material number R900951301; the exact supplied version, additional suffixes and connections will be confirmed in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.