AI-generated Rexroth PGH series appearance reference for PGH3-2X/013RE07VU2; exact configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Pumps

Rexroth PGH3-2X/013RE07VU2 Internal Gear Pump

Rexroth PGH3-2X/013RE07VU2 internal gear pump, material number R900951304. Fixed displacement 13.30 cm³/rev with clockwise rotation and a keyed shaft. Original new product; request current pricing.

Catalog type code: PGH3-2X/013RE07VU2

Material number / MPN: R900951304
Geometric displacement: 13.30 cm³/rev
Maximum operating pressure: 315 bar

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth PGH3-2X/013RE07VU2 is a frame-size 3, NG 13 internal gear pump with a fixed geometric displacement of 13.30 cm³/rev. This page identifies catalog configuration R900951304 for quotation. Send the complete nameplate and installation details to confirm the required supplied version.

Checking the keyed-shaft 013 version

This configuration combines 13.30 cm³/rev displacement with an E keyed shaft and a two-hole flange. Include photographs of the shaft and mounting face when requesting a replacement. The PGH3/013 RR configuration uses a different shaft and mounting arrangement and needs a separate mechanical check.

Key configuration details

13.30 cm³/rev fixed geometric displacement.
E shaft: cylindrical keyed shaft.
U2 mounting: Two-hole flange to ISO 3019-1, 101-2.
Material number R900951304 for catalog identification.

2X denotes the component series family. The first R after the size code means clockwise rotation viewed at the shaft end. The next letter, E, specifies a cylindrical keyed shaft. Port code 07 means suction and pressure ports to ISO 6162-1. V indicates FKM shaft seal and seals. U2 mounting: Two-hole flange to ISO 3019-1, 101-2.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	PGH3-2X/013RE07VU2
Material number / MPN	R900951304
Pump type	Internal gear pump; fixed displacement
Frame size	3
Component series	2X
Nominal size	NG 13
Geometric displacement	13.30 cm³/rev
Maximum operating pressure	315 bar
Peak pressure	350 bar; transient limit only
Catalog speed range	600–3000 rpm; operating conditions apply
Rotation	Clockwise, viewed at the shaft end
Shaft end	E — cylindrical keyed shaft
Pressure port	ISO 6162-1
Suction port	ISO 6162-1
Seals	V — FKM shaft seal and seals
Mounting	U2 — Two-hole flange to ISO 3019-1, 101-2

Maximum operating pressure: 315 bar. Peak pressure: 350 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 600–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

Match the complete nameplate, material number and any additional suffixes.
Confirm clockwise rotation, the E shaft, coupling and U2 mounting dimensions.
Verify the pressure and suction port sizes, flange pattern and installation orientation.
Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.

Request a quotation

Please include:

Required catalog configuration: PGH3-2X/013RE07VU2; material number: R900951304
Quantity and destination country
Existing pump nameplate and photographs of the shaft, flange and ports
Working pressure, pressure cycle, drive speed and required flow
Hydraulic fluid, operating temperature and installation details
Required supply condition and requested delivery date

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH3-2X/013RE07VU2

Frequently asked questions

What identifies the PGH3-2X/013RE07VU2 configuration?

Use material number R900951304 with the full type code. It specifies 13.30 cm³/rev displacement, an E shaft and U2 mounting. Confirm the nameplate, additional suffixes and actual mechanical dimensions before ordering.

Can I request a quote using PGH3-22/013RE07VU2?

Include that reference with a clear nameplate photograph. This page uses the 2X component-series designation; the precise supplied version and its connections will be confirmed in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.