AI-generated Rexroth PGH series appearance reference for PGH4-3X/025RE11VU2; exact configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Pumps

Rexroth PGH4-3X/025RE11VU2 Internal Gear Pump

Rexroth PGH4-3X/025RE11VU2 internal gear pump, material number R901147101. Fixed displacement 25.30 cm³/rev with clockwise rotation and a keyed shaft. Original new product; request current pricing.

Catalog type code: PGH4-3X/025RE11VU2

Material number / MPN: R901147101
Geometric displacement: 25.30 cm³/rev
Maximum operating pressure: 315 bar

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth PGH4-3X/025RE11VU2 is a frame-size 4, NG 25 internal gear pump with a fixed geometric displacement of 25.30 cm³/rev. This page identifies the R901147101 catalog configuration for quotation. Match the complete nameplate and installation details when requesting a replacement.

Confirming the 025 duty point

The 025 version has 25.30 cm³/rev displacement. Specify the target flow at the available shaft speed and the system’s pressure cycle. For an existing power unit, include the full pump code and photographs of the keyed shaft and flange before a quotation is finalized.

Key configuration details

25.30 cm³/rev fixed geometric displacement.
Clockwise rotation with RE11VU2 configuration.
Catalog material number R901147101 for identification.

3X denotes the component series family. R = clockwise viewed at the shaft end; E = cylindrical keyed shaft; 11 = pressure port to ISO 6162-2, with suction port to ISO 6162-1; V = FKM shaft seal and seals; U2 = two-hole mounting flange to ISO 3019-1.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	PGH4-3X/025RE11VU2
Material number / MPN	R901147101
Pump type	Internal gear pump; fixed displacement
Frame size	4
Component series	3X
Nominal size	NG 25
Geometric displacement	25.30 cm³/rev
Maximum operating pressure	315 bar
Peak pressure	350 bar; transient limit only
Catalog speed range	400–3000 rpm; operating conditions apply
Rotation	Clockwise, viewed at the shaft end
Shaft end	E — cylindrical keyed shaft
Pressure port	ISO 6162-2
Suction port	ISO 6162-1
Seals	V — FKM shaft seal and seals
Mounting	U2 — two-hole flange to ISO 3019-1

Maximum operating pressure: 315 bar. Peak pressure: 350 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 400–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

Match the complete nameplate, material number and any additional suffixes.
Confirm clockwise rotation, shaft dimensions, coupling and mounting flange dimensions.
Verify the pressure and suction port sizes, flange pattern and installation orientation.
Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.

Request a quotation

Please include:

Required catalog configuration: PGH4-3X/025RE11VU2; material number: R901147101
Quantity and destination country
Existing pump nameplate and photographs of the shaft, flange and ports
Working pressure, pressure cycle, drive speed and required flow
Hydraulic fluid, operating temperature and installation details
Required supply condition and requested delivery date

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH4-3X/025RE11VU2

Frequently asked questions

Is PGH4-3X/025RE11VU2 a variable-displacement pump?

It has fixed displacement. Flow changes with shaft speed and operating losses; the pump code does not specify an adjustable displacement controller.

Can I order using the reference PGH4-30/025RE11VU2?

Include that reference and a nameplate photograph. This page uses the 3X series-family designation and material number R901147101; the exact supplied version, additional suffixes and connections will be confirmed in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.