AI-generated Rexroth PGH series appearance reference for PGH4-3X/040RE11VE4; exact configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Pumps

Rexroth PGH4-3X/040RE11VE4 Internal Gear Pump

Rexroth PGH4-3X/040RE11VE4 internal gear pump, material number R901147108. Fixed displacement 40.10 cm³/rev with clockwise rotation and a keyed shaft. Original new product; request current pricing.

Catalog type code: PGH4-3X/040RE11VE4

Material number / MPN: R901147108
Geometric displacement: 40.10 cm³/rev
Maximum operating pressure: 315 bar

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth PGH4-3X/040RE11VE4 is a frame-size 4, NG 40 internal gear pump with a fixed geometric displacement of 40.10 cm³/rev. This page identifies catalog configuration R901147108 for quotation. Send the complete nameplate and installation details to confirm the required supplied version.

Identifying the four-hole E4 flange

The E4 suffix identifies a four-hole mounting flange to ISO 3019-2. Keep it in the full model when comparing quotations for the 40.10 cm³/rev pump. Verify the mounting pilot, bolt pattern, shaft and coupling before considering a replacement for any U2-mounted unit.

Key configuration details

40.10 cm³/rev fixed geometric displacement.
E shaft: cylindrical keyed shaft.
E4 mounting: Four-hole flange to ISO 3019-2.
Material number R901147108 for catalog identification.

3X denotes the component series family. The first R after the size code means clockwise rotation viewed at the shaft end. The next letter, E, specifies a cylindrical keyed shaft. Port code 11 means a pressure port to ISO 6162-2, with suction port to ISO 6162-1. V indicates FKM shaft seal and seals. E4 mounting: Four-hole flange to ISO 3019-2.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	PGH4-3X/040RE11VE4
Material number / MPN	R901147108
Pump type	Internal gear pump; fixed displacement
Frame size	4
Component series	3X
Nominal size	NG 40
Geometric displacement	40.10 cm³/rev
Maximum operating pressure	315 bar
Peak pressure	350 bar; transient limit only
Catalog speed range	400–3000 rpm; operating conditions apply
Rotation	Clockwise, viewed at the shaft end
Shaft end	E — cylindrical keyed shaft
Pressure port	ISO 6162-2
Suction port	ISO 6162-1
Seals	V — FKM shaft seal and seals
Mounting	E4 — Four-hole flange to ISO 3019-2

Maximum operating pressure: 315 bar. Peak pressure: 350 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 400–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

Match the complete nameplate, material number and any additional suffixes.
Confirm clockwise rotation, the E shaft, coupling and E4 mounting dimensions.
Verify the pressure and suction port sizes, flange pattern and installation orientation.
Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.

Request a quotation

Please include:

Required catalog configuration: PGH4-3X/040RE11VE4; material number: R901147108
Quantity and destination country
Existing pump nameplate and photographs of the shaft, flange and ports
Working pressure, pressure cycle, drive speed and required flow
Hydraulic fluid, operating temperature and installation details
Required supply condition and requested delivery date

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH4-3X/040RE11VE4

Frequently asked questions

What identifies the PGH4-3X/040RE11VE4 configuration?

Use material number R901147108 with the full type code. It specifies 40.10 cm³/rev displacement, an E shaft and E4 mounting. Confirm the nameplate, additional suffixes and actual mechanical dimensions before ordering.

Is the E4 flange the same as U2?

E4 uses four mounting holes under ISO 3019-2. U2 uses a two-hole flange under ISO 3019-1. Verify mounting dimensions and coupling alignment before considering a change.

Can I request a quote using PGH4-30/040RE11VE4?

Include that reference with a clear nameplate photograph. This page uses the 3X component-series designation; the precise supplied version and its connections will be confirmed in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.