Rexroth PGH5-3X/160RE11VU2 Internal Gear Pump

Overview

The Rexroth PGH5-3X/160RE11VU2 is a frame-size 5, NG 160 internal gear pump with a fixed geometric displacement of 162.80 cm³/rev. This page identifies catalog configuration R901147119 for quotation. Send the complete nameplate and installation details to confirm the required supplied version.

Matching size 160 to the pressure duty

Size 160 provides 162.80 cm³/rev displacement with a maximum operating pressure of 210 bar and a brief peak limit of 260 bar. It uses an E40N keyed shaft and a 152-2 two-hole flange. Confirm the required flow, motor power and suction arrangement at the intended working point.

Key configuration details

• 162.80 cm³/rev fixed geometric displacement.
• E shaft: cylindrical keyed shaft with through-drive to ISO 3019-2, E40N.
• U2 mounting: Two-hole flange to ISO 3019-1, 152-2.
• Material number R901147119 for catalog identification.

3X denotes the component series family. The first R after the size code means clockwise rotation viewed at the shaft end. The next letter, E, specifies a cylindrical keyed shaft with through-drive to ISO 3019-2, E40N. Port code 11 means a pressure port to ISO 6162-2, with suction port to ISO 6162-1. V indicates FKM shaft seal and seals. U2 mounting: Two-hole flange to ISO 3019-1, 152-2.

Technical specifications

Maximum operating pressure: 210 bar. Peak pressure: 260 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 400–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

• Match the complete nameplate, material number and any additional suffixes.
• Confirm clockwise rotation, the E shaft, coupling and U2 mounting dimensions.
• Verify the pressure and suction port sizes, flange pattern and installation orientation.
• Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.

Request a quotation

Please include:

• Required catalog configuration: PGH5-3X/160RE11VU2; material number: R901147119
• Quantity and destination country
• Existing pump nameplate and photographs of the shaft, flange and ports
• Working pressure, pressure cycle, drive speed and required flow
• Hydraulic fluid, operating temperature and installation details
• Required supply condition and requested delivery date

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH5-3X/160RE11VU2

Frequently asked questions

What identifies the PGH5-3X/160RE11VU2 configuration?

Use material number R901147119 with the full type code. It specifies 162.80 cm³/rev displacement, an E shaft and U2 mounting. Confirm the nameplate, additional suffixes and actual mechanical dimensions before ordering.

What pressure limit applies to this size?

The maximum operating pressure is 210 bar. The 260 bar peak limit is only for the specified brief transient conditions. Do not apply the 315 bar operating rating of other sizes to this configuration.

Can I request a quote using PGH5-30/160RE11VU2?

Include that reference with a clear nameplate photograph. This page uses the 3X component-series designation; the precise supplied version and its connections will be confirmed in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.