AI-generated Rexroth PGH series appearance reference for PGH5-3X/200RR07VU2; exact configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Pumps

Rexroth PGH5-3X/200RR07VU2 Internal Gear Pump

Rexroth PGH5-3X/200RR07VU2 internal gear pump, material number R901147134. Fixed displacement 200.40 cm³/rev with clockwise rotation and a splined shaft. Original new product; request current pricing.

Catalog type code: PGH5-3X/200RR07VU2

Material number / MPN: R901147134
Geometric displacement: 200.40 cm³/rev
Maximum operating pressure: 170 bar

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth PGH5-3X/200RR07VU2 is a frame-size 5, NG 200 internal gear pump with a fixed geometric displacement of 200.40 cm³/rev. This page identifies catalog configuration R901147134 for quotation. Send the complete nameplate and installation details to confirm the required supplied version.

Checking the 200-size combination-pump configuration

The 200 RR configuration provides 200.40 cm³/rev displacement with a 17-tooth spline and a 127-2 flange. It is cataloged for central and rear positions in pump combinations. Maximum operating pressure is 170 bar, with a brief peak limit of 210 bar. Verify assembly torque and the size 200 suction and pressure connections before ordering.

Key configuration details

200.40 cm³/rev fixed geometric displacement.
R shaft: splined shaft with through-drive to ISO 3019-1 (38-4, 17T, 12/24DP).
U2 mounting: Two-hole flange to ISO 3019-1, 127-2.
Material number R901147134 for catalog identification.

3X denotes the component series family. The first R after the size code means clockwise rotation viewed at the shaft end. The next letter, R, specifies a splined shaft with through-drive to ISO 3019-1 (38-4, 17T, 12/24DP). Port code 07 means suction and pressure ports to ISO 6162-1. V indicates FKM shaft seal and seals. U2 mounting: Two-hole flange to ISO 3019-1, 127-2.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	PGH5-3X/200RR07VU2
Material number / MPN	R901147134
Pump type	Internal gear pump; fixed displacement
Frame size	5
Component series	3X
Nominal size	NG 200
Geometric displacement	200.40 cm³/rev
Maximum operating pressure	170 bar
Peak pressure	210 bar; transient limit only
Catalog speed range	400–3000 rpm; operating conditions apply
Rotation	Clockwise, viewed at the shaft end
Shaft end	R — splined shaft with through-drive to ISO 3019-1 (38-4, 17T, 12/24DP)
Pressure port	ISO 6162-1
Suction port	ISO 6162-1
Seals	V — FKM shaft seal and seals
Mounting	U2 — Two-hole flange to ISO 3019-1, 127-2

Maximum operating pressure: 170 bar. Peak pressure: 210 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 400–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

Match the complete nameplate, material number and any additional suffixes.
Confirm clockwise rotation, the R shaft, coupling and U2 mounting dimensions.
Verify the pressure and suction port sizes, flange pattern and installation orientation.
Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.
Confirm the central or rear position in the pump combination, adapter details and permissible through-drive torque.

Request a quotation

Please include:

Required catalog configuration: PGH5-3X/200RR07VU2; material number: R901147134
Quantity and destination country
Existing pump nameplate and photographs of the shaft, flange and ports
Working pressure, pressure cycle, drive speed and required flow
Hydraulic fluid, operating temperature and installation details
Required supply condition and requested delivery date
Pump-combination layout, assembly position and transmitted torque

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH5-3X/200RR07VU2

Frequently asked questions

What identifies the PGH5-3X/200RR07VU2 configuration?

Use material number R901147134 with the full type code. It specifies 200.40 cm³/rev displacement, an R shaft and U2 mounting. Confirm the nameplate, additional suffixes and actual mechanical dimensions before ordering.

What pressure limit applies to this size?

The maximum operating pressure is 170 bar. The 210 bar peak limit is only for the specified brief transient conditions. Do not apply the 315 bar operating rating of other sizes to this configuration.

Do all PGH RR versions use the same spline?

No. This configuration uses 38-4, 17T, 12/24DP, under ISO 3019-1. The first R denotes clockwise rotation and the second R denotes the shaft type. Check the complete spline and mounting specification; the RR letters alone do not define identical dimensions across frame sizes.

Can I request a quote using PGH5-30/200RR07VU2?

Include that reference with a clear nameplate photograph. This page uses the 3X component-series designation; the precise supplied version and its connections will be confirmed in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.