AI-generated Rexroth PGH series appearance reference for PGH5-3X/160RR11VU2; exact configuration may differ — AI-generated series appearance reference. Actual product and configuration may differ.

Request current product and nameplate photographs to confirm the exact supplied configuration.

Rexroth / Hydraulic Pumps

Rexroth PGH5-3X/160RR11VU2 Internal Gear Pump

Rexroth PGH5-3X/160RR11VU2 internal gear pump, material number R901147133. Fixed displacement 162.80 cm³/rev with clockwise rotation and a splined shaft. Original new product; request current pricing.

Catalog type code: PGH5-3X/160RR11VU2

Material number / MPN: R901147133
Geometric displacement: 162.80 cm³/rev
Maximum operating pressure: 210 bar

Request a Quote ↗Specifications Check the fit

Send your complete model code, quantity and destination. Price, condition, availability and delivery are confirmed in the quotation.

Overview

The Rexroth PGH5-3X/160RR11VU2 is a frame-size 5, NG 160 internal gear pump with a fixed geometric displacement of 162.80 cm³/rev. This page identifies catalog configuration R901147133 for quotation. Send the complete nameplate and installation details to confirm the required supplied version.

Checking the 160 through-drive load

This 162.80 cm³/rev splined-shaft version is cataloged for central and rear positions in pump combinations. It uses a 17-tooth spline and a 127-2 flange. Confirm transmitted torque and the pressure cycle: maximum operating pressure is 210 bar, with a brief peak limit of 260 bar.

Key configuration details

162.80 cm³/rev fixed geometric displacement.
Clockwise rotation, viewed at the shaft end.
R shaft: splined shaft with through-drive to ISO 3019-1 (38-4, 17T, 12/24DP).
U2 mounting: Two-hole flange to ISO 3019-1, 127-2.
Material number R901147133 for catalog identification.

3X denotes the component series family. The first R after the size code means clockwise rotation viewed at the shaft end. The next letter, R, specifies a splined shaft with through-drive to ISO 3019-1 (38-4, 17T, 12/24DP). Port code 11 means a pressure port to ISO 6162-2, with suction port to ISO 6162-1. V indicates FKM shaft seal and seals. U2 mounting: Two-hole flange to ISO 3019-1, 127-2.

Technical specifications

Brand	Rexroth
Condition	New
Catalog type code	PGH5-3X/160RR11VU2
Material number / MPN	R901147133
Pump type	Internal gear pump; fixed displacement
Frame size	5
Component series	3X
Nominal size	NG 160
Geometric displacement	162.80 cm³/rev
Maximum operating pressure	210 bar
Peak pressure	260 bar; transient limit only
Catalog speed range	400–3000 rpm; operating conditions apply
Rotation	Clockwise, viewed at the shaft end
Shaft end	R — splined shaft with through-drive to ISO 3019-1 (38-4, 17T, 12/24DP)
Pressure port	ISO 6162-2
Suction port	ISO 6162-1
Seals	V — FKM shaft seal and seals
Mounting	U2 — Two-hole flange to ISO 3019-1, 127-2

Maximum operating pressure: 210 bar. Peak pressure: 260 bar, limited to 10 ms per event and 300 hours total accumulated peak duration. Reference measurements use HLP46 at 50°C and approximately 30 mm²/s. Confirm the limits for the actual fluid and duty; these values are not recommended system settings.

Catalog speed range: 400–3000 rpm. Permissible speed depends on pressure, drive power, oil viscosity and inlet conditions; confirm the operating point before ordering.

Check the installation

Match the complete nameplate, material number and any additional suffixes.
Confirm clockwise rotation, the R shaft, coupling and U2 mounting dimensions.
Verify the pressure and suction port sizes, flange pattern and installation orientation.
Provide normal and peak pressure, speed, fluid type, viscosity and inlet conditions.
Confirm the central or rear position in the pump combination, adapter details and permissible through-drive torque.

Request a quotation

Please include:

Required catalog configuration: PGH5-3X/160RR11VU2; material number: R901147133
Quantity and destination country
Existing pump nameplate and photographs of the shaft, flange and ports
Working pressure, pressure cycle, drive speed and required flow
Hydraulic fluid, operating temperature and installation details
Required supply condition and requested delivery date
Pump-combination layout, assembly position and transmitted torque

Supply condition, price, availability and delivery terms will be confirmed in the quotation.

Request a quote for PGH5-3X/160RR11VU2

Frequently asked questions

What identifies the PGH5-3X/160RR11VU2 configuration?

Use material number R901147133 with the full type code. It specifies 162.80 cm³/rev displacement, an R shaft and U2 mounting. Confirm the nameplate, additional suffixes and actual mechanical dimensions before ordering.

What pressure limit applies to this size?

The maximum operating pressure is 210 bar. The 260 bar peak limit is only for the specified brief transient conditions. Do not apply the 315 bar operating rating of other sizes to this configuration.

Do all PGH RR versions use the same spline?

No. This configuration uses 38-4, 17T, 12/24DP, under ISO 3019-1. The first R denotes clockwise rotation and the second R denotes the shaft type. Check the complete spline and mounting specification; the RR letters alone do not define identical dimensions across frame sizes.

How should I identify the required supplied version?

Send the full catalog type code, material number and a clear nameplate photograph. Confirm the actual supplied version, additional suffixes and installation dimensions in the quotation.

What is needed to confirm price and availability?

Send the complete identification, quantity, destination and required supply condition. Price, stock, delivery time and warranty terms are confirmed in the quotation.